Motorbike Communication System PowerCom ROGER One with
integrated 2-Way-Radio Hands-Free-Kit
The motorbike intercom with two-way radio
hands-free kit of the new AKE-PowerCom series
Everything under control? — Everything is Roger!
Fit-for-motorbike hands-free kit with intelligent driving noise
compensation, automatic volume adjustment and intercom activation on demand
for two person, space-saving placed in a solid aluminum case.
The ROGER One has a fit-for-motorbike
voice control and enables an hands-free voice communication via two-way
radio of your choice from motorbike to motorbike and per intercom between
driver and passenger.
The ROGER One is fit for very high
driving speeds when using an adequate helmet set.
Robust Control device in an aluminum case with 12 V from on board
supply system.
WEB BIKE WORLD REVIEW
MOTORBIKE REVIEW
Important device
features:
- Fit for motorbike intercom:
Crystal-clear hands-free full duplex helmet-to-helmet intercom system
makes a safe voice communication possible even with very high driving
noises.
- Effective elimination of disturbing driving noise:
- Expensive filters reduce the driving noise.
- If nobody is talking, a fit-for-motorbike voice-switch ensures
also at high speed a soft muting of the microphone signals.
- The helmet microphone is switched off completely if it is not
needed, e.g. when driving solo, with deactivated VOX and when not
pressing the transmission button.
- Fit-for-motorbike two-way radio hands-free kit:
- Various adjustment settings:
Lowest voice volume level, driving noise compensation, volume of
intercom and two-way radio modulation may be adjusted individually.
- Easiest handling because of power supply by the motorbike:
No changing or recharging of batteries necessary.
- Less mounting effort because of automatic power-on of the
power supply:
Plugging in the helmet connector will automatically power-on the
ROGER One. This allows connecting the system directly to the
battery of the vehicle or optionally to any 12V power plug.
- Practical power on of accessories:
This function allows automatically power-on connected devices like
two-way radio, if desired. Simply plug in helmet connector and start
driving.
- Extensive integrated vehicle dejam facilities:
Save time and money. ROGER One is extremely safe from
electronic vehicle jam. Also the operation on CAN-Bus power supply is
possible.
- Robust installation for tough operations:
ROGER One is installed in a solid water protected aluminum
case. It has weatherproof helmet plug outlets equipped with raised
markers for easy plugging in at the correct position, even with gloves.
The electronics are protected by an automatic power-off against over and
under voltage. All amplifier outputs are short-circuit-proof and are
equipped with overload protection.
- Adequate helmet sets:
High quality helmet installation sets are available for full face
helmets, flip-up helmets and open face helmets.
- Dimensions: 70 x 149 x 20mm
Device connectors:
- Helmet of driver
- Helmet of pillion rider
- two-way radio or walkie-talkie
- Operating device
- Power 12 V
- Power-on automatic for accessories
Scope of delivery:
Electronic control device, Velcro fastener, cable fixer, assembly
instruction, operating instructions.
Order Number: 30341