|
|
|
Important
|
|
|
INSTALLING
BLINDER M25 X-TREME :
Download Install manual PDF Format
BLINDER M45 X-TREME :
Download Install manual PDF Format
|
The
BLINDER M-10 TWIN should be mounted facing the front or back of the
vehicle. The M-10 TWIN should be mounted between the passenger side
headlight (or taillight) and the driver's side headlight (or taillight).
The on/off button and the beeper are of course placed inside the cabin
of the car.
|
|
|
Mounting |
|
 |
|
Divide the front of the car in two half's. Install one of the BLINDERs
M-10 in the middle of one half, and then do the same on the other half.
The distance between the two units must be 50 - 60 cm.
BLINDER performs equally well when mounted horizontally or vertically
with the lens in the forward direction. |
|
The two BLINDER units fits into the front of most cars.
Here on the Dodge Neon used at the
Texas Field
Test.
|
|
Horizontally
and vertically |
|
|
|
It is very important, that you mount the two BLINDER
M-10's very carefully. The two units must point straight ahead.
Otherwise the detectors and jammers will not function optimally.
Avoid positioning anything in front of, or obstruction
the lens. The lens must project from, or lie flush with the grille. |
|
The two units must point straight ahead. That means horizontally
to the road surface and parallel to the driving direction.
|
The Self Test Function |
|
|
|
When
the ignition is turned on, the upstart self-test function will turn-on
the in-carbine alert for two seconds telling you that the BLINDER is
ready to do its job.
|
|
Electrical
Wiring |
|
|
|
|
|
Service and control |
|
|
|
Keep
in mind that snow and dirt that gets on the lens decreases the output of
the BLINDER M-10 TWIN's range to where it may not detect or jam the
police laser gun when you need it. Keep the lens clean and as free of
debris as possible. Scratches and stone damage can also affect output.
If the lens becomes too badly dam-aged, order replacement lenses
separately.
|
|
Don't drive
illegally |
|
|
|
We
recommend against driving recklessly or above the posted speed limit and
assume no responsibility for the actions of any person that purchases or
uses the BLINDER M-10 TWIN. We cannot replace your driving license, so
drive legally, responsibly and carefully.
|
|
How to use your
new BLINDER |
|
|
|
| For
avoiding any trouble with the police, we strongly recommend to follow
the method mentioned below when dealing with police laser guns:
At the moment when you hear the BLINDER warning signal, you must at
once
- Slow down if you are speeding
- Switch off the BLINDER
In that way you will allow the police to get a clear speed
measurement without making any attention. Sometimes the police need two
or three shoots before getting a usable speed measurement.
Therefore turn off the BLINDER within a few seconds, and nobody will
suspect that something is wrong!
|
|
Online service |
|
|
|
If
you have any problems or questions regarding the installation of your
BLINDER, please contact us at
sales@blinder.dk.
|
|
BLINDER M-10
Specifications |
|
|
|
|
 |
