Right and Left LED arrays indicate
sequential turn signals. These superbright
LEDs (8500 mCd) have a wide viewing angle of
180 degrees. They are sunlight readable,
even from the adjacent lanes.
Brake Light
Modulator
A cluster of (6) LEDs is magnified by an
acrylic lens to broadcast the Deceleration
Warning sequence. As soon as you tap the
brakes, they modulate rapidly at first then
slow down to a solid ON over a period of (4)
seconds.
Running Lights
This is a programmable feature. For
additional visibility, all LEDs stay ON at
reduced intensity, but you can also turn
this feature Off.
All electronics are encased in a scratch
resistant polycarbonate housing and sealed
for weather protection.
Alloy License Plate Holder
The frame is die cast alloy for strength and
durability. Powder coated in Black
polyurethane with "Wrinkled finish" to match
non-chrome European trim.
Designed to accept the most commonly used
7-1/2" license plates.
Draws very little current (3/10th of an
AMP), so it does not interfere with
integrated ABS or EVO brake systems.
Requires connecting to the turn signal and
brake wires. You do not have to cut any
wires, if you use the Scotchlok (T-Tap)
connectors, which are also supplied.
vectraLIGHT
LPB-16 can be mounted with the
LED arrays on top or bottom of the license
plate.
