SM-6 unit is designed as a plug-in
replacement for BMW "K" Bikes with dual handlebar mounted turn signal switches.
This unit has a matching 15-pin connector and replaces the original Siemens turn
signal relay.
SM-6 operates all four turn signal
lamps at reduced intensity to enhance your visibility in the traffic. This
conversion is all done internally without any modifications to the wiring. This
optional feature can be enabled or disabled on the fly.
SM-6 has soft touch configuration. Soft
touch configuration allows the timeouts and running light options to be changed
on the fly.
SM-6 has (3) selectable timouts: 8
seconds, 30 seconds, and 45 seconds.
NEW FEATURE (xx930BF2 code)
Built-in RUN-TURN-BRAKE functions
No need to buy other turn signal conversion product. You get all the features of
RUN-TURN-BRAKE and automatic signal canelling!
If you hook-up the 12 volt supply from the brakes, to the
signalMinder brake input:
BRAKE FLASH OPTION will flash the turn signal lamps every time you apply
brakes. A short 2 second flash pattern begins with quick flashes then slows down
to stay on solid.
BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are
released. This allows continued flashing for those times when you are waiting at
the signals to make a turn and do not want the time-out to cancel the flashing.
MORE FEATURES
FAST FLASH Lane Change
If you hold down the turn signal switch, turn signals will flash twice as fast
for the first (4) times. This is an excellent feature to get immediate attention
while changing lanes.
Same-Side-Cancel
Instead of using your right thumb in that awkward motion to push up the Cancel
button, simply push the Same-side button to stop flashing.
4-Way Emergency Flash Push both right and left buttons simultaneously to
begin 4-Way flash. To stop, use the right side Cancel button.
The last thing you need is to worry about canceling the turn signals! Use all of
the built-in options of the signalMinder
and enjoy the ride.
signalMinder has an add-on product
known as vectraLIGHT. These LED arrays
simply plug into the signalMinder and
inherit all of it's features. They are designed to mount under the turn signal
mirrors.
