tailBlazer
BE SAFE! Compared to a typical automobile, motorcycle
stop lamps are simply too small to attract immediate attention.
This is especially true for the cruisers because they are
mounted so low to the ground.
tailBlazer overcomes this by rapidly flashing the taillights the
instant you apply the brakes. The flash rate then slows down to
a steady ON - this cycle lasts about 4 seconds. This flash
pattern is called a Deceleration Warning.
Motorcycle Safety Foundation (MSF) suggests that you pump your
brakes at each stop. tailBlazer does it automatically, and by
flashing both filaments for a maximum brightness.
tailBlazer Notes
■ Unique exponential decay flash pattern
■ As easy as replacing a bulb
■ Programmable taillight intensity
■ BMW CAN-bus requires "Z" version!
Full Application Chart
Click on the chart button or link above to download the
Application Chart in PDF format. You will need Adobe Acrobat 5.0
or newer version to view or print it.
Updated 02-2007, for more recent updates look-up your specific
application using the Application drop-downs.
tailBlazer Installation Manual
Click on the product logo or link above to download the
Installation Manual in PDF format. You will need Adobe Acrobat
5.0 or newer version to view or print it.
Instructions for programming are applicable to manufacturing
date code: 06/2005 or newer versions. In most cases, the
programming sequences have been compatible with older versions.
If you have difficulty, or are unable to execute programming,
please consult with techsupport.
|
