VL-10
vectraLIGHT LED arrays are
designed to be mounted on the bottom edge of
the mirrors of most bikes. They are flexible
so that they can bend somewhat to match
contour of the mirror. The unit attaches to
the mirrors with an extremely durable two
sided tape.
Instead of replacing the entire mirror
assembly, these arrays are easy to mount and
provide additional functions:
- Front facing 5 LED array in amber
- Rear Facing 5 LED array in Red
- Brake override for the rear facing LEDs
Each LED array is totally waterproof and has
a 6' (1.8m) long black USOC cable with an
RJ-11 plug for inserting in the receptacles
of the signalMinder unit.
vectraLIGHTs
operate as a reduced intensity running
lights, both amber LEDs in the front and red
LEDs in the back operate SEQUENTIALLY
as turn signals, and as brake lights the
rear facing red LEDs come on at full
brightness.
The software for the
VL-10
version allows for full implementation of
all the settings of the signalMinder,
including the programmable running light
intensity and time-out selecions.
The sideview mirrors are the widest points
of the bike. Mirror mount location makes
your bike look wider and much more
conspicuos.
vectraLIGHT
uses a microprocessor to time the sequencing
of the super bright LEDs. Made of AlGaIdP
material, amber LEDs have a minimum output
of 5,000 mCd, and the red LEDs have a
minimum output of 8,000 mCd. The half angle
of the LEDs is 30 degrees for wide viewing
cone.
