SM-1
unit is designed as a plug-in replacement
for many early European and some Japanese
bikes.
signalMinder
uses a computer chip to cancel the turn
signals. There are three selectable
timeouts; 10, 20, 30 seconds.
RUNNING LIGHT OPTION:
By attaching two quick-connect wires
included, you can convert ALL FOUR turn
signals to running lights and establish a
dual-channel system on your bike.
Using the DIP Switch #1, you can keep them
off and still have the dual-channel system.
With the dual-channel system, when you
activate the RIGHT turn signal three times
in succession, you get 4-way hazard flash
function.
NEW FEATURE
(d17EBxx code)
Built-in RUN-TURN-BRAKE functions
No need to buy other turn signal conversion
product. You get all the features of
RUN-TURN-BRAKE and automatic signal
canelling!
If you hook-up the 12 volt supply from the
brakes to the
signalMinder brake input:
BRAKE FLASH OPTION will flash the
turn signal lamps every time you apply
brakes. A short 2 second flash pattern
begins with quick flashes then slows down to
stay on solid.
BRAKE OVERRIDE OPTION suspends the
time-out feature until the brakes are
released. This allows continued flashing for
those times when you are waiting at the
signals to make a turn and do not want the
time-out to cancel the flashing.
MORE FEATURES
HANDLE BAR RETURN SPRINGS:
If above options are hooked-up, these tiny
return springs can be inserted in the
handlebar switch to force it back to neutral
automatically. You don't have use the
Push-to-cancel of the handlebar switch.
Above options are not required to be
installed, but utilizing them allows fully
automatic turn signal cancellation. We
highly recommend hooking them up.
Please Note! NONE of the wires on the
bike have to be cut. The kit includes
Scotchlok brand of Insulation Displacement
Connectors (IDC) to tap into existing wires.
The last thing you need is to worry about
canceling the turn signals! Use all of the
built-in options of the
signalMinder
and enjoy the ride.
signalMinder
has an add-on product known as
vectraLIGHT. These LED arrays
simply plug into the
signalMinder
and inherit all of it's features. They are
designed to mount under the turn signal
mirrors
