• Home
• Kisan PathBlazer
• PathBlazer P115W-H7

Detailed Product Description:

P115W-H7

P115W-H7 unit is totally self-contained. There are no hidden boxes or switches. There are no wires to cut or splice.

P115W-H7 unit is designed for 2-pin European H7 style headlight bulbs. It's 1.0" (25.4mm) by 1.35" (34.4mm), and externally mounted.

For CAN-bus BMWs, choose "Z" version below.

pathBlazer circuit modulates the hi-beam current - from 100% ON to about 17% OFF. This is accomplished by using a p-channel MOSFET, which is inherently safe. The MOSFET is designed to fail in the ON state. For additional safety, the circuits DO NOT utilize the lo-beam whatsoever!

MAX power rating is 115 watts. DO NOT EXCEED!

P115W-H7 comes with a detachable daylight sensor, which simply plugs into the pathBlazer. The daylight sensor functions as a switch; it stops modulation when it cannot see enough daylight. Since the internal circuitry is controlled by a microprocessor, it allows for customizable features.

Programmable Daylight Sensor

If you turn the high beam on and then turn the ignition on three times quickly, the sequence is interpreted as an active command to change the sensitivity.

Software version v.820D allows two settings: High and Low.

Software version v.823A allows 8 linear steps between the high and low end.

The daylight sensor has a low frequency filter to avoid false triggering. Please note that florescent lamps may not trigger the sensor - it needs constant incandescent light.

pathBlazer uses a soft-switching technique. It throttles the current flow through the bulb filament, so that there's no "thermal shock" due to a sudden inrush of current, which can damage the bulb filament or shorten its life considerably. This is far superior than maintaining a small voltage!

Select hi-beam to modulate - as long as there's sufficient daylight. If you enter a tunnel or if it gets dark, it will stop the modulation of the hi-beam and stay ON steady. Select lo-beam to end modulation.

You have complete control.

You may also be interested in:

PILOT ROAD 3 $205.95 $133.87

Kruzer Kaddy Drink Carriers - Handle Bar Mount $29.99 High-quality & Stylish Chrome Finish Fits 7/8" to 1 1/4" Handlebars Foam inserts included to accomodate several drinks sizes, including 12oz. cans, 16oz. bottles, and 20oz. bottles. Comes packaged with all parts and tools needed for assembly

PathBlazer Headlight Modulators $96.99 BE SEEN! If you're not seen by others around you, you're in trouble. Most Drivers don't expect to see anything smaller than a car. They may be looking right at you, but a small motorcycle just won't register in time. See the application guide  for your brand of motorcycle below then choose the correct Plug-N-Play PathBlzer from the dropdown box.

Wheel Jockeys - Make Chain Maintenance A Snap $59.00 Lube, Clean, Ride  Motorcycle chain and wheel work made easy. Finally, a simple tool offers a solution for the cumbersome task of rotating motorcycle wheels for: Chain Maintenance, Wheel and Tire Cleaning, Valve Stem Positioning, and Tire Inspection. And, whats more, its small enough to be easily stowed under the seat or in any motorcycle luggage!

Sena SMH10 Bluetooth Headset / Intercom for Motorcycles: SMH10B $219.00 $186.15 This is the USB version (2nd edition) of the Sena SMH10 which is a great step forward in motorcycle Bluetooth intercoms. Not only will it pair with 3 other headsets, (it will only transmit and receive to one at a time) but it includes an ingenious jog dial for controlling music remotely.  It also puts out more volume than any other headset by a wide margin, and the speakers do not distort.  This kit includes everything needed to set up one helmet for music, intercom and phone.

No rating yet... Be the first to rate this product!