SM-2 unit is designed as a plug-in
replacement for many Japanese and some early European bikes. Extra ground wire
of the unit must be attached to a good chassis location.
signalMinder uses a computer chip to
cancel the turn signals. There are three selectable timeouts; 10, 20, 30
seconds.
RUNNING LIGHT OPTION:
By attaching two quick-connect wires included, you can convert ALL FOUR turn
signals to running lights and establish a dual-channel system on your bike.
Using the DIP Switch #1, you can keep them off and still have the dual-channel
system.
With the dual-channel system, when you activate the RIGHT turn signal three
times in succession, you get 4-way hazard flash function.
NEW FEATURE (d17EBxx code)
Built-in RUN-TURN-BRAKE functions
No need to buy other turn signal conversion product. You get all the features of
RUN-TURN-BRAKE and automatic signal canelling!
If you hook-up the 12 volt supply from the brakes to the
signalMinder brake input:
BRAKE FLASH OPTION will flash the turn signal lamps every time you apply
brakes. A short 2 second flash pattern begins with quick flashes then slows down
to stay on solid.
BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are
released. This allows continued flashing for those times when you are waiting at
the signals to make a turn and do not want the time-out to cancel the flashing.
MORE FEATURES
HANDLE BAR RETURN SPRINGS:
If above options are hooked-up, these tiny return springs can be inserted in the
handlebar switch to force it back to neutral automatically. You don't have use
the Push-to-cancel of the handlebar switch.
Above options are not required to be installed, but utilizing them allows fully
automatic turn signal cancellation. We highly recommend hooking them up.
Please Note! NONE of the wires on the bike have to be cut. The kit
includes Scotchlok brand of Insulation Displacement Connectors (IDC) to tap into
existing wires.
The last thing you need is to worry about canceling the turn signals! Use all of
the built-in options of the signalMinder
and enjoy the ride.
signalMinder has an add-on product
known as vectraLIGHT. These LED arrays
simply plug into the signalMinder and
inherit all of it's features. They are designed to mount under the turn signal
mirrors.
