TPM-40 is a complete kit for motorcycles that have a
valve-stem in hollow wheel spokes.
(1) Valve-Cap style Wheel Sensor without fillport for hollow spoke
wheel
(1) Screw-on valve-Cap style Wheel Sensor with fillport for short
valve stems
(1) Display - handlebar mounted or flush mounted
(2) Transceivers - mounted facing the wheel
TPM-40 Wheel Sensors are screw-on valve cap type. One does not have a
fill-port, so adding or removing air requires removal of the sensor.
And the other does have a fill-port. Machined from aircraft grade 6061
T6 aluminum and weigh only 0.25 Oz (7.1 Grams).
The backlit LCD display is ultrasonic welded for waterproofing. The size
is 2.00h x 2.45h x 0.50h ( 51mm x 61mm x 13mm). Handlebar mounting
cradle is also included.
Adjustable backlight intensity.
Multicolor backlight for warning.
Detachable faceplate.
High tactile buttons.
Transceiver electronics, clamp-base and USOC cable are over-molded in
polyurethane for durability. They are 2.10h x 0.75h (53.3mm x 19mm) and
weigh 6.5 Oz (185 Grams).
Select appropriate mounting kit available
for your bike.
Built-in systemOne software implementation, so that after
entering the wheel diameter and fully loaded weight of the bike, you can
see real-time performance data.
Speed in MPH or KPH
Rolling HP at the rear wheel
0 to 60 MPH times - automatic capture & update
Max HP capture during the ride - background capture & update
Real time monitoring of tire pressures and the performance of the bike
as you ride.
